Hot Tags:

Site Map xml
Home > Turret punch press tools > Murrata (Wedemman) Punch Toolings > Murrata extrusion forming tool

Murrata extrusion forming tool

  • murrata wiedemann 114 series B station guide
  • murrata wiedemann 114 series C station guide
  • murrata wiedemann 114 series D station guide
  • murrata wiedemann 114 series E-F station guide
  • murrata wiedemann 114 series GHJ station guide
  • murrata wiedemann 114 series IA station guide
  • murrata wiedemann 114 series IF station guide
  • murrata wiedemann 114 series XA station guide
  • 114 series B/C/D station urethane stripper
  • 114 series EF/GH/IA station urethane stripper
  • 114 series J/L/XA station urethane stripper
  • Murrata 114 sereis punch and die D station
  • Murrata 114 series B station punch press tools
  • Murrata 114 series C station tool
  • Murrata 114 series EF station punch and die
  • Murrata 114 series GHJ station punch and die
  • Murrata 114 series KL station tool
  • Murrata 114 Series punch tool AX station
  • VULCAN series AB station guide
  • VULCAN series C station guide
  • Vulcan series D station guide
  • Vulcan series EF station guide
  • Vulcan series GHJ station guide
  • Vulcan series IF auto index station guide
  • Vulcan series XA station guide
  • Vulcan series B/C/D station metal stripper
  • Vulcan series EF station metal stripper
  • Vulcan series GHJ station metal stripper
  • Vulcan series XA station metal stripper
  • Muratta Vulcan series B station punch and die
  • Murrata Vulcan series AX station tool

Product Abstract:

Extrusion Tool 1.Extrusion forming part belongs to thinning and stetching area. 2.The flanging edge has a little tilt. 3.Need to pre-punch hole before flanging. 4.When customer has special requirements we can design compound punch extrusion tool.

Product Description

Extrusion Tool


1. Extrusion forming part belongs to thinning and stetching area.

2. The flanging edge has a little tilt.

3. Need to pre-punch hole before flanging.

4. When customer has special requirements we can design compound punch extrusion tool.



Knockout Tool


1.Can not process plate thickness that thicker than specified in the order.

2.Forming height may be more than one plate thickness, if need to avoid position please order the maching flatening die.

3.Please indicate the forming direction in order.

4.Multiple knockout hole is available.


Bridge Forming Tool


1. The proportion between the theoretical bridge width and the plate thickness should be large than 1.25:1.

2. When the bridge width is less than 2mm, the forming difficulty will increase.

3. We produce mold according to the plate thickness that customer requires. So we do not suggest to process the other plate thickness.

4. Must define the min. distance between bridge holes.

For punch body, we produce it with SKH-51. It has another name of high speed steel. This is an alloy steel with complex composition. It includes tungsten, molybdenum, chromium, vanadium, cobalt and other carbide forming elements. The total amount of alloying element arrive to 10%-25%. On the condition of hot heat (around 500℃) that emerging with high-speed punching, it will keep high hardness and HRC can arrive above 60. This is also the main feature of high speed steel which is called red hardness. 


This material can make the toolings more durable and wear-ressistant which will cause a longer tooling life.


The die material we choose is Japanese imported special steel DC53, which is a new type tooling steel improved from SKD11. This material overcome the weakness of SKD11’s insufficient tempering hardness and toughness. The strength and hardness is excellent while doing heat treatment, HRC can arrive to 62-63.

DC53 steel’s toughness in cold die steel is more prominent. Tools made by DC53 will have little cracks and cracking which will greatly improve the tooling life.




Related Products

Inquiry Information

  • *Subject:

  • *Content:

  • *Telephone Number:

  • *Your E-Mail:

  • *Confirm Text:


Brand Zone

Contact Us